Settings For Scanning - Konica Minolta C350 User Manual

Using the Scan Functions
8.3

Settings for Scanning

When sending image data using a scan function, the following parameters
can be entered from this machine's control panel.
Displaying the setup screen
1
On this machine's control panel, press the [Scan] key.
2
If network user authentication is enabled, a login screen appears. In
this case, enter the network user name and password, and then touch
[Login].
Memo
For details on specifying settings for network user authentication,
refer to "User Authentication" on page 12-71.
3
Touch the button for the desired screen ([Scan Mode], [Address],
[Original Setting], and [MISC.]).
C350
8
8-13