Media Connector Rear Panel Controls - LightSpeed Technologies Topcat User Manual

MEDIA CONNECTOR REAR PANEL
CONTROLS
1
1. SYSTEM POWER SWITCH:
System power is turned ON or
OFF with this pushbutton. When
power is ON, the blue power LED
lights.
2. REGISTRATION PUSHBUTTON:
Pushing the Registration button in
conjunction with the registration
button on the TOPCAT module
will cause the two modules to
synchronize as an operating
system. Refer to the Registration
Procedure in this manual.
LINK REGISTR POWER
2
5
2
3. ALD AUDIO OUTPUT: 3.5mm
stereo jack sends audio signal
to external equipment such as a
recorder or an assistive listening
device like Lightspeed's LES-370
personal FM system.
4. ALD AUDIO VOLUME
CONTROL: Adjusts the audio
signal level output through the
ALD audio output connector.
5. RF LINK LED: This LED is lit
anytime the RF link is established
between Media Connector and the
TOPCAT. This LED will glow green
while the system modules remain
linked.
4
3
25