Hardware Setup; Mic Setting; System Settings - Pioneer SVM-1000 Operating Instructions Manual

HARDWARE SETUP

HARDWARE SETUP
UTILITY
(SET UP)
The hardware setup values are preserved even when power is
turned OFF.
Initiate hardware setup
1 Turn the POWER switch on while pressing the UTILITY (SET
UP) button.
• Continue depressing the UTILITY (SET UP) button while the
logo mark [PIONEER PRO DJ] is displayed.
• The hardware setup screen will be displayed.

MIC SETTING

1 Touch [MIC]
The MIC setting screen will be displayed.
2 Choose settings by touching [] or [].
OUTPUT TO
BOOTH MONITOR
TALK OVER
THRESHOLD LEVEL
TALK OVER LEVEL
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
42
En
HI
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0 0
Set whether or not to output the audio
from the MIC to the booth monitor.
Adjust the sensitivity of talk over.
Adjust the level of talk over.
POWER

SYSTEM SETTINGS

1 Touch [SYSTEM].
The SYSTEM setting screen will be displayed.
2 Choose settings by touching [] or [].
VIDEO SYSTEM
DIGITAL OUT MAX
LEVEL
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
Selects the video signal format. When
used in North America, it should be set to
NTSC (7.5 IRE).
Selects the maximum level of the digital
out circuit.