Drivers; Virtualdj 8 Setup - Pioneer DJM-850 Operation Manual

Drivers

For both Windows and Mac OSX computers
install the latest firmware and drivers from
http://www.pioneerdj.com/en/support/software/djm-
850#firmware-update and
http://www.pioneerdj.com/en/support/software/djm-
850#drivers
If the drivers are properly installed, the DJM-850
Setting Utility will appear each time you connect
your DJM-850 with your computer via the USB
port.
See Advanced Setup for further details.
.

VirtualDJ 8 Setup

Download and install
http://www.virtualdj.com/download/index.html
(in case you have not done already)
Once VirtualDJ 8 is launched, a Login Window
will appear. Login with your virtualdj.com
account credentials.
A Pro Infinity, a
Subscription License is required to use the
Pioneer DJM-850. Without any of the above
Licenses, the mixer will operate for 10 minutes
each time you restart VirtualDJ.
http://www.virtualdj.com/buy/index.html
*For DVS Support an additional Timecode Plus
license is required if the Pioneer DJM-850 Plus
license is purchased.
A window will appear next, to verify the proper
detection.
Click on the "Use Soundcard" button and
VirtualDJ will automatically create and apply the
pre-defined audio configuration using the built-in
audio interface of the Pioneer DJM-850
Click on the "Change Skin" button and VirtualDJ
will automatically load the default 4 Decks GUI.
Click to OK.
The unit is now ready to operate with VirtualDJ.
VirtualDJ 8 from
PLUS* or a Pro
VirtualDJ 8 – Pioneer DJM-850
4