Using The Effect Function; Using Beat Effects - Pioneer SVM-1000 Operating Instructions Manual

USING THE EFFECT FUNCTION

USING THE EFFECT FUNCTION
This function applies effects to the selected channel's sound and video. Effects include BEAT effects, which are applied in linkage to the
track's BPM; TOUCH effects, which control effects by directly touching the screen; and TEXT effects, which display onscreen characters
with effects added in rhythm to the track. The UTILITY (MASTER MONITOR) button can be pressed to display the master monitor's image
on the LCD screen.
UTILITY
(MASTER MONITOR) CH SELECT
USB
HI

USING BEAT EFFECTS

BEAT effects can be instantaneously set in-sync with the BPM
(Beat Per Minute) of the track, enabling you to apply various effects
to the rhythm even during live performances.
When master monitor is off
1
2
5
6
VIDEO FX
PATTERN
TAP
10 10
9 9
8 8
7 7
6 6
5 5
4 4 EFFECT
3 3
2 2
1 1
0 0
ON/OFF
4
11
7
8
9
10
When master monitor is on
1
2
5
6
1 Effect category Selects the category of effects you wish to
apply. Select from [BEAT] (red), [TOUCH]
buttons
(blue), and [TEXT] (green).
Select and touch the desired effect button
2 Effect select
from the 12 BEAT effects.
buttons
When master monitor is on, displays
3 MASTER
master output.
monitor
Rotate the CH SELECT dial to select the
4 Channel select
channel to which you wish to apply the
display
effect.
5 Effect mode A: Touch to apply the effect to audio only.
select buttons
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
6 Video EFFECT Monitors effect results.
monitor
7 Video effect Rotate the VIDEO FX PATTERN/TEXT
BANK dial to select the video effect
pattern display
pattern. When BEAT effect is enabled, you
can choose from
[ORIGINAL]/[INVERSE]/[EDGE]/[HUE].
8 [BPM Touch to switch the measurement
method of the BPM between AUTO and
AUTO/TAP]
TAP.
button
9 BPM/parameter Displays the measured BPM and effect
parameters.
display
10 Beat button Touch to select the multiplication factor
of the beat calculated from the BPM for
synchronization of effects.
Allows use of images produced internally
11 [VISUALIZER]
by the unit.
button
3 4
7
11
8
9
10
17
En