Table Of Contents - Pioneer SVM-1000 Operating Instructions Manual

Installing the SVM-1000 in an EIA rack
The screw holes located on the left and right ends of the front
panel (within the side cover) match the 19-inch EIA rack.
• Remove the 10 screws (five screws each located on the left and
right sides of the unit) before installing the unit to the rack.
• Holes for rack installation can be located when the side covers
are removed.
• Attach the unit to the rack using screws of the appropriate size
(screws not provided with the unit).
• When installing the unit in a rack, take care to avoid pinching
your fingers.
Contents
CONFIRM ACCESSORIES..............................................4
CAUTIONS REGARDING HANDLING............................4
Location .......................................................................................... 4
Cleaning the Unit........................................................................... 4
Disclaimer ...................................................................................... 4
About Copyright............................................................................. 4
FEATURES ....................................................................4
NAMES AND FUNCTIONS OF PARTS ...........................6
CONNECTION PANEL ................................................................... 6
OPERATION PANEL ...................................................................... 7
CONNECTIONS ...........................................................10
CONNECTING INPUTS ................................................................ 10
CONNECTING OUTPUTS ............................................................ 11
CONNECTING MICROPHONE AND HEADPHONES ............... 12
CONNECTING THE POWER CORD ............................................ 12
BASIC OPERATIONS...................................................13
FADER CURVE SELECTION ....................................................... 14
USING THE VIDEO CONTROL FUNCTIONS .................15
OPERATING THE VIDEO CROSS FADER .................................. 15
OPERATING THE VIDEO CHANNEL SWITCH ........................... 15
OPERATING IN THE VIDEO SOLO MODE ................................. 16
VIDEO MIX EFFECTS CHART ...................................................... 16
USING THE EFFECT FUNCTION...................................17
USING BEAT EFFECTS ................................................................ 17
USING TOUCH EFFECTS............................................................. 19
USING TEXT EFFECTS ................................................................. 20
EDITING TEXT ............................................................................... 22
DISPLAYING/HIDING THE MASTER MONITOR ........................ 22
EFFECT LIST.................................................................................. 23
Note
• Never place this unit directly above a power amplifier, as the
heat given off by the amplifier might result in damage to the unit.
Placing the unit directly above a power amplifier might also
result in ham radio signals being picked up or in other types of
interference.
• Allow at least 1U (43.7 mm) space between this component and
Screws
the one mounted above it, so as to assure that the cords
Side cover connected to this unit's input/output connectors and terminals
do not touch the component above.
• Always be sure to remove the unit from its rack before shipping.
• When moving the unit while still installed in its rack, exercise
caution to avoid subjecting the unit to shocks or vibration.
USING THE JPEG VIEWER .......................................... 31
BEFORE USING THE JPEG VIEWER...........................................31
JPEG VIEWER SETUP ..................................................................31
THE VIDEO EQUALIZER FUNCTION............................ 34
SET UP THE VIDEO EQ ................................................................ 34
TURNING THE EQUALIZER ON/OFF ..........................................34
FADER START FUNCTION .......................................... 35
CROSS FADER START PLAY AND BACK CUE PLAY................35
PERFORM UTILITY SETUP .......................................... 36
MIDI SETTINGS ............................................................................36
SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL
SEQUENCER, OR USING SVM-1000 INFORMATION TO
OPERATE AN EXTERNAL SEQUENCER .................................... 36
MIDI CODE LIST ...........................................................................37
PERFORM VIDEO MONITOR SETUP .........................................41
KEYBOARD LANGUAGE SETUP.................................................41
HARDWARE SETUP.................................................... 42
MIC SETTING ................................................................................ 42
SYSTEM SETTINGS....................................................................... 42
MASTER OUT SETTINGS ............................................................. 43
LCD SETTINGS.............................................................................. 43
MONITOR OUT SETTINGS...........................................................43
TOUCH PANEL SETTINGS...........................................................44
RETURNING TO DEFAULT SETTINGS ........................................ 44
ENDING HARDWARE SET UP.................................................... 44
TROUBLESHOOTING .................................................. 45
ABOUT THE LCD SCREEN ..........................................................46
ABOUT MINIATURE FLUORESCENT TUBE TECHNOLOGY ..... 46
SPECIFICATIONS........................................................ 47
3
En