Chapter 1 - Introduction; Specifications - DFI BL100 Series User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
8
• LGA 775 socket for:
- Intel Core 2 Quad / Intel
® TM
- Intel Wolfdale 45nm processors
®
• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• 1333*/1066/800MHz FSB
*Available on CPUs that support 1333MHz FSB
Note: We recommend using screw with metal pad type of CPU
heat sink and fan.
• Intel chipset
®
- Intel Q35 Express chipset
®
- Intel ICH9 I/O Controller Hub
®
• One 240-pin DDR2 DIMM socket
• Supports 667MHz and 800MHz DDR2 SDRAM
• Supports maximum of 4GB system memory using 512Mbit or
1Gbit technology for x8 and x16 devices
*ECC DDR2 DIMMs are not supported
• 1 PCI slot
• Integrated Intel GMA3100
- Up to 384MB maximum video memory
- 2048x1536 at 75 Hz maximum resolution
• LVDS interface (BL100-N and BL100-P only)
- Panel support up to UXGA (1600x1200)
- LVDS 18-bit or 24-bit output through SDVO interface
- Single/dual LVDS transmitter up to 165M pixels/s
Note: The default BIOS does not support LVDS. Please request
for a customized BIOS to support LCD panel using the
LVDS interface.
• Realtek ALC662 High Definition audio CODEC
• Six channel DAC suppor ts 16/20/24-bit PCM format for 5.1
channel audio solution
• All DAC support independent 44.1k/48k/96kHz sample rate
• All ADC support independent 44.1k/48k/96kHz sample rate
• One Realtek RTL8111C PCI Express Gigabit controller
(BL100-P and BL100-PE only)
• Two Realtek RTL8111C PCI Express Gigabit controllers
(BL100-N and BL100-NE only)
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Suppor ts 4 SATA (Ser ial ATA) interfaces which are
compliant with SATA 1.0 specification
• SATA speed up to 3Gb/s
Core 2 Duo
® TM