DFI BL100 Series User Manual page 68

3
BIOS Setup
Onboard Serial Port 1 to Onboard Serial Port 4
Auto
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
Disabled
Onboard Parallel Port
378/IRQ7, 3BC/IRQ7, 278/IRQ5
Disabled
Parallel Port Mode
The options are Standard, EPP, ECP and ECP+EPP. These apply to a
standard specification and will depend on the type and speed of
your device. Refer to your peripheral's manual for the best option.
Standard
Allows normal speed operation but in one direction only.
"ECP (Extended Capabilities Port)"
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal mode's data transfer rate.
"EPP (Enhanced Parallel Port)"
Allows bidirectional parallel port operation at maximum speed.
ECP Mode Use DMA
This field is used to select a DMA channel for the parallel port. The
options are 1 and 3. Default setting: 3.
68
The system will automatically select an I/O address
for the onboard serial port.
manually select an I/O address for the onboard se-
rial port.
Disables the onboard serial port.
IRQ for the onboard parallel port.
Disables the onboard parallel port.
Allows
Selects the I/O address and
you to