DFI BL100 Series User Manual page 58

3
BIOS Setup
Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives.
Move the cursor to this field then press <Enter>. Use the Up or
Down arrow keys to select a device then press <+> to move it up
or <-> to move it down the list.
↑↓
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Virus Warning
This field protects the boot sector and partition table of your hard
disk drive. When this field is enabled, the Award BIOS will monitor
the boot sector and partition table of the hard disk drive. If an
attempt is made to write to the boot sector or partition table of
the hard disk drive, the BIOS will halt the system and an error
message will appear.
After seeing the error message, if necessary, you will be able to run
an anti-virus program to locate and remove the problem before any
damage is done. Many disk diagnostic programs which attempt to
access the boot sector table will cause the warning message to
appear. If you are running such a program, we recommend that you
first disable this field.
58
Phoenix - AwardBIOS CMOS Setup Utility
1. Bootable Add-in Cards
PU/PD/+/-: Change Priority
Hard Disk Boot Priority
F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
↑ ↓
Use < > or < > to
select a device, then
press <+> to move it up,
or <-> to move it down
the list. Press <ESC> to
exit this menu.
ESC: Exit
F7: Optimized Defaults