Changing The Backup Schedule - LaCie Ethernet Disk RAIDNetwork RAID Storage System User Manual

LaCie Ethernet Disk RAID
User Manual

7.5. Changing the Backup Schedule

When you protect a disk, you specify when you want
backups to occur. However, you can change this sched-
ule at any time as long as the Status page indicates that
the Status is Normal. If protection is stopped (for ex-
ample, if you recovered the disk or recovered a different
partition on the same disk), you cannot change the disk
schedule until you resume protection by clicking
Up Now.
To change the backup schedule:
1. Click Schedule.
2. In the Protected disk
backup schedule you want to change.
3. Specify when you want backups to occur.
For example, if you want backups to occur every
day, select Daily
want backups to occur once a week, select the day
of the week from the
the time.
If you don't want backups to occur automatically, se-
lect Not Scheduled
Time list appears dimmed.) Backups will occur only
when you start one manually (as described in section
7.3. Manually Backing Up Your
4. Click Apply.
The schedule change takes effect immediately, and
the date and time of the next scheduled backup ap-
pears in the Next backup
(Firmware version 1.4)
list, select the disk whose
from the Recurrence list. If you
Recurrence list. Then select
from the Recurrence list. (The
Disk).
area.
Back
Fig. 7.5.
Protecting Local Disks
page