Enabling Remote Boot - LaCie Ethernet Disk RAIDNetwork RAID Storage System User Manual

LaCie Ethernet Disk RAID
User Manual

7.8.1. Enabling Remote Boot

■
To enable remote boot:
1. In the Protected disk
system disk or partition. If you protected multiple
system disks or partitions, select the first system disk
or partition on your computer (typically Disk 0).
2. From the Action
The Enable Remote Boot
Fig. 7.8.1.A.). This dialog box displays a list of all the
NICs on your computer.
3. From the list, select the NIC that you want to use
when remotely booting from the Ethernet Disk
RAID.
4. Click Enable. A message appears, advising you that
your network connection will be temporarily inter-
rupted.
5. Click Yes to allow the temporary network inter-
ruption. (Your network connection will be re-
stored immediately after this process is complete.)
On the Enable Remote Boot
area shows the progress of the enabling process. If
any problems are encountered – for example, if the
selected disk or partition was not your system disk
– that portion of the process is marked as "Failed."
You can click the plus sign next to the process de-
scription to expand it and display an error message
that explains exactly what happened.
(Firmware version 1.4)
list on any page, select your
menu, click Enable Remote
dialog box appears (see
dialog box, the Details
Boot.
Fig. 7.8.1.A
Fig. 7.8.1.B
Protecting Local Disks
page 0