LaCie Ethernet Disk RAIDNetwork RAID Storage System User Manual page 95

LaCie Ethernet Disk RAID
User Manual
6. If you previously protected this disk and removed pro-
tection, specify whether or not you want to re-use the
existing backup or create a new one. See Fig. 7.2.D.
If you select Re-use the existing
select which backup to re-use from the list. When
you select an item from the list, the size also ap-
pears to help you identify exactly which back-
up to use. The word "Preferred" appears for the
backup that best matches the disk that you're cur-
rently protecting. Once you have selected the de-
sired backup, click
If you select Create a new backup
you must select the desired backup location as de-
scribed in step 4.
(Firmware version 1.4)
backup, you must
Next and go to the next step.
and click Next,
Protecting Local Disks
Fig. 7.2.D
TeChNICAl NOTe:
play the expected information, you might need
to click Cancel, click Action
nection, and then try to protect the disk again.
Repairing the network connection refreshes the
information about the backups that exist on the
Ethernet Disk RAID.
CAUTION: If you select any disk other than
the preferred one, all the data associated with the
selected disk will be overwritten with the data as-
sociated with the disk that you're protecting, and
you will not be able to recover any previous back-
ups associated with the selected disk.
page 
If the list does not dis-
Repair Con-