Usb Devices; Attaching Usb Devices; Disconnecting Usb Devices; Step 10 Attaching Usb Devices - LaCie Ethernet Disk RAIDNetwork RAID Storage System User Manual

LaCie Ethernet Disk RAID
User Manual

4.5. USB Devices

4.5.1. Attaching USB Devices

■
If you purchased optional USB external storage de-
vices, you can attach them to the USB ports on the back
of the unit (see
When you plug a USB device into the Ethernet
Disk RAID, the device is automatically detected and is
added to the USB page. (You might need to click
to update the display.)

4.5.2. Disconnecting USB Devices

■
The USB page displays a list of all USB devices that
are currently attached to the Ethernet Disk RAID. USB
disks are identified by the names usbdisk1 and usbdisk2.
(These names cannot be changed.)
To unplug a USB device from the Ethernet Disk
RAID, you must first use the Manager to disconnect it.
To disconnect a USB device:
1. In the navigation bar, click Advanced.
2. In the left pane, click
3. In the list of USB devices, select the device(s) that
you want to disconnect.
4. Click Disconnect.
5. When the confirmation message appears, click OK.
You can now unplug the USB device.
(Firmware version 1.4)
in Fig. 4.5.1.).
USB.
Configuring Your Ethernet Disk RAID
Scan
Fig. 4.5.1.
TeChNICAl NOTes:
USB hubs are not supported.
❖
Any USB disk must be formatted before you use
❖
it with the Ethernet Disk RAID, and only the
first partition of a FAT or FAT32 file system will
be recognized.
Fig. 4.5.2.
TeChNICAl NOTe:
disconnect a USB device, unplug it from the
Ethernet Disk RAID, plug it back in, and then
click Scan. This reactivates the USB device. User
assignments are always retained.
page 
A
2 1
If you inadvertently
K