Installing Your Lacie Ethernet Disk Raid; Connecting The Ethernet Disk Raid To The Network - LaCie Ethernet Disk RAIDNetwork RAID Storage System User Manual

LaCie Ethernet Disk RAID
User Manual

3. Installing Your LaCie Ethernet Disk RAID

Installation of the LaCie Ethernet Disk RAID is
easy, just follow the steps below to install it:
Step 1

Connecting the Ethernet Disk RAID to the network

Step 2 Turning on the Ethernet Disk RAID
3.1. Connecting the Ethernet Disk RAID to the Network
To connect the Ethernet Disk RAID to your net-
work, insert one end of the RJ-45 Ethernet cable into
the Ethernet port 1 on the back of the unit (see
Fig. 3.1.). Then insert the other end of the RJ-45 Ether-
net cable into a network port.
(Firmware version 1.4)
in
Installing Your Ethernet Disk RAID
Page 13
Page 14
Fig. 3.1.
page 
2 1
A
K