Proxy Server - Xerox Phaser 4622 System Administrator Manual

2. To test communication, click on the Test Communication Now button.
'Please Wait' will display while the printer tests the communication and displays one of the
following:
• Test Communication Pass
• Test Communication Fail
3. Click on OK.
4. Click on Save Changes to save the changes.

Proxy Server

Note The Proxy Server page displays when you click on the Configure button for HTTP Proxy
Server from the Communications Setup area.
1. In the HTTP area on the Proxy Server page:
a. To automatically detect HTTP Proxy Server, check the Enabled checkbox for Auto Detect
Proxy Settings.
Note Automatically detecting proxy settings may overwrite manual settings. Disable Auto Detect
Proxy Settings to ensure use of manual settings.
The Auto Detect process will first use the manual settings to access the Internet. If this fails it will
then use WPAD to auto detect proxy settings. If WPAD fails it will then try a direct connection.
2. Check the Enable checkbox for HTTP Proxy Server to designate a server.
a. For Name or IP Address select either IP Address or Host Name.
b. Enter details in the IP Address and Port or Host Name and Port fields.
c. Enter details in the Exception List field.
3. Click on Save Changes to save the changes.
4. Click on OK when the acknowledgement message displays.
SMart eSolutions
Phaser 4622
System Administrator Guide
103