Linux Cups - Xerox Phaser 4622 System Administrator Manual

Network Installation
GUI Method
1. Log in as root.
2. From the main desktop, select the icons System Administration: Printers: Printer Manager.
3. Click on Printer: Add Remote: UNIX....
4. Enter the following information into the Add Remote UNIX Printer form:
a. Host: hostname.
Where hostname is the machine Host Name from the /etc/hosts file.
b. Printer: name of the queue being created.
For example: dc xxxq.
c. Click on OK to complete the form.
5. Click on OK in the Message window.
Click on Host:Exit.
6.
7. Click on File: Close this directory.
8. Click on File: Close this directory.
9. Click on Save in the Warning Confirmation window.
10. Enter Exit to log out of root account.
11. Open Unix Window.
tty Method
1. Enter su to access Super User mode.
2. Enter rlpconf to create a printer.
3. Enter the following information:
4. Printer Name: queuename
5. Remote Printer: r
Hostname: hostname
6.
7. If the information has been entered correctly, enter y
8. Click on Enter to accept the default for a non-SCO remote printer.
9. Click on Enter to accept the default for non-default printer.
10. Click on Enter to start the process for adding a queue.
11. Enter q to quit the rlconf program.

Linux CUPS

Static Addressing
Information Checklist
Before starting the Installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
1. See Chapter 3, Configure Static Addressing using the Machine,
2. Linux operating system that supports printtool.
Note Not all distributions of Linux support printtool.
32 Phaser 4622
System Administrator Guide
Information Checklist on page 15.