Xerox Phaser 4622 System Administrator Manual page 61

Printing Preferences
Printing Preferences contains all the driver features and allows you to set default settings for the driver.
1. Within your Printers folder, right-click on the Phaser 4622 printer driver and select Printing
Preferences.
Note Click on the Help button in the driver to view information about each feature.
Paper/Output
2. Click on the Paper/Output tab.
3. In Job Type, select one of the following job types:
• Normal Print.
• Secure Print.
• Sample Set.
• Delay Print.
• Personal Print
• Saved Job.
4. Click on the Paper menu. The Paper menu allows you to select the specific paper that you want to
print on. Select the paper supply you require, or set up a custom size paper supply, as described
below.
Note To set up a custom paper:
in Paper, click Advanced Paper Selection. Advanced Paper Selection allows you to input
a.
custom measurements for non-standard paper sizes, and also scale your document.
b. In Paper size select ....
c. Configure the paper size settings as require, then click the OK button.
You can specify the original document size, the output paper size, and whether you want to
manually or automatically scale the output so that it fits the selected paper size.
You can select standard sizes or use the New... options to customize the sizes.
d. Configure any other settings in the Advanced Paper Selection as required, then click the OK
button.
5. To add covers:
a. In Special Pages select Add Covers....
b. In Cover Options, select the cover options you require.
c. In Front Cover Paper and Back Cover Paper, select the paper you want to use for the covers.
d. If you want to use blank or pre-printed covers, select Blank or Pre-printed. If you want to
print images from your document on the covers, select Printed.
e. Click OK.
6. To add transparencies separators:
a. In Paper select Transparency Separators....
b. Configure the separator options.
c. Click OK.
Printer Drivers
Phaser 4622
System Administrator Guide
55