Enable Secure Http (Ssl) - Xerox Phaser 4622 System Administrator Manual

Security

Enable Secure HTTP (SSL)

Once the machine has a machine Server Certificate, you can enable secure HTTP.
1. In the Internet Services Properties menu, click on the Connectivity link.
Click on the Protocols link.
2.
3. Click on the HTTP link.
4. Click on the Enable checkbox in the Protocol area.
5. Enter the HTTP Port Number if required. The default is 80.
6. Select the Require SSL option in the HTTP Security Mode drop-down menu.
7. Click on the Apply button to accept the changes.
If prompted, enter the Administrator's User ID admin and Password 1111, and click on Login.
8. Close your web browser and then access the Internet Services screen again. The Security warning
will display. Self-signed certificates causes browsers to display messages which question the trust
of the certificate. Click on the OK button to continue.
94 Phaser 4622
System Administrator Guide