Activating The Security Function; Clock Settings - Kenwood DDX3035BT Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS

Activating the security function

You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the <Top Menu> screen:
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.

Clock settings

1
Display the <Top Menu> screen.
On the source control screen:
2
Display the <Setup> screen.
3
Display the <Clock> screen.
4
Set the clock time.
<NAV>*
1 Synchronizes the clock time with
the connected navigation unit.
<Radio Data
Synchronizes the clock time
System>* with FM .
2
<OFF>
Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
5
Finish the procedure.
* 1 Appears only when the navigation unit is connected.
* Not selectable for DDX3035BT Region 4/DDX3035 Region 4.
2
ENGLISH 5