Initial Settings; Initial Setup; Activating The Security Function - Kenwood DDX374BT Instruction Manual

INITIAL SETTINGS

INITIAL SETTINGS

Initial setup

When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 57)
1
Perform the initial settings.
<Demonstration> Activate or deactivate the
(Page 58) display demonstration.
<Language> Select the text language
(Page 59) used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<iPod Setup> Select the connection
(Page 20) method of iPod/iPhone.
<Rear Camera> Configure the settings to
(Page 37) display the picture from
the connected rear view
camera.
<User Change the display design.
Customize>
(Page 53)
4
<Viewing Angle> Select the viewing angle
(Page 58) in relation to the monitor
panel to make the panel
easier to see.
2
Finish the procedure.
The Home screen is displayed.

Activating the security function

You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the Home screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.