Kenwood DDX3035BT Instruction Manual page 43

SETTINGS SETTINGS
<System> setting screen
<Language>*
1
Select the text language used for on-screen
information.
• English (initial )/Spanish/French/German/Italian/
Dutch/Russian /Portuguese/Chinese-Simplified/
Chinese-Traditional/Thai/Turkish/Arabic/
Persian/Hebrew/Greek/Indonesia/Korean
– For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/
Portuguese are available. If another language
has been selected, the text language for external
monitors will be set to English.
• GUI Language: Select a language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
< Clock>
Adjust the clock time. (Page 5)
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<Remote Sensor>
• ON (Initial): Activates the remote sensor.
• OFF: Cancels.
< SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 39)
<Bluetooth Setup>*
2
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of the registered devices. You can connect the
device or delete the registration. (Page 29)
• PIN Code: Changes the PIN code of the unit.
(Page 28)
• Device Name: Shows the device name to be
shown on the Bluetooth device— KENWOOD BT
MM-8U2.
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only (Initial): From front speakers only.
– All : From all speakers.
• Auto Pairing:
– ON (initial): Establishes the pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
<TEL Key Long Press>*
2
Assigns the function of the TEL button when held.
• V-OFF: Turns off the screen. (Page 8)
• VOICE (initial): Activates voice dialing. (Page 32)
• R-CAM: Displays the picture from the rear view
camera. (Page 25)
<AUD Key Long Press>*
3
Assigns the function of the AUD button when held.
• V-OFF (initial ): Turns off the screen. (Page 8)
• R-CAM : Displays the picture from the rear view
camera. (Page 25)
<DivX® VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
<SI>
Activate or deactivate the security function.
(Page 4)
<Serial Number>
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 40)
<Security Code>
Register the security code for the unit. (Page 4)
<Steering Remote Controller>
Assign the functions to the keys on the remote
controller of the steering wheel. (Page 48)
<System Information>
Displays the version information of the software.
You can update the software. (Page 40)
* "Please Power Off" appears when the setting is changed. Turn off
1
the power, then turn on to enable the change.
* Only for DDX3035BT/DDX3035BTM.
2
*
3 Only for DDX3035/DDX3035M.
ENGLISH 43