Kenwood DDX3035BT Instruction Manual page 52

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a USB device/iPod/iPhone
iPod/iPhone except for iPhone 5/iPod touch
iPhone 5/iPod touch
(5th Generation)/iPod
nano (7th Generation)
(commercially available)
USB device
(commercially available)
KCA-iP102
(optional accessory)
CA-U1EX (optional
accessory)*
1
USB 2.0 cable (accessory of the iPod/iPhone)
USB terminal
iPod/Audio Visual input 2 (iPod/
AV-IN2)
(iPod/AV Input 2 switchable)
KCA-iP22F (optional accessory)
* Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
1
52
Connecting external components
(5th Generation)/
iPod nano (7th
Generation)
(commercially available)
1 Audio Video input (AV-IN1)
• Visual input (Yellow)
• Audio left input (White)
• Audio right input (Red)
2 AV-OUT/Video output (Yellow)
3 Rear view camera input (Yellow)
4 NAVI I/F input
5 Subwoofer preout (monaural output)
• Subwoofer left output (White)
• Subwoofer right output (Red)
6 Rear preout
• Audio left output (White)
• Audio right output (Red)
7 Front preout
• Audio left output (White)
• Audio right output (Red)
8 Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
Connecting microphone for Bluetooth
(only for DDX3035BT/DDX3035BTM)
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7