Tuner - Kenwood DDX3035BT Instruction Manual

T U N E R
L s i e t n n i g o t h t e a r d o i
Indications and buttons on the source
control screen
1 2
4 5 6 7 8 9
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with su cient signal
strength.
5 AF indicator
6 Seek mode
7 LO.S indicator (Page 22)
8 RDS indicator
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
p Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
q Standby reception indicators
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[MODE] Changes the settings for tuner
reception on the <TUNER Mode>
3
screen. (Page 22)
[TI] Activates/deactivates TI standby
reception mode. (Page 23)
[MONO]* Activates/deactivates monaural
p
mode for better FM reception.
(Stereo e ect will be lost.)
• The MONO indicator lights up
q
while monaural mode is activated.
[TEXT]
Changes the display information.
(See the right column.)
[PTY]*
Enters PTY search mode. (Page 23)
[AM] Selects the AM band.
[FM] Selects the FM band.
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in the stations in
the memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method di ers
according to the selected seek
mode. (See above.)
[MENU] Displays the <Top Menu> screen.
* Appears only when FM is selected as the source.
Changing the display information
The preset list and the station name for FM Radio
Data System (when PS signal is coming in) are
displayed.
• Pressing [TEXT] again displays the text
information for the station currently being
received.
ENGLISH 21