Adjustment For Video Playback - Kenwood DDX3035BT Instruction Manual

SETTINGS SETTINGS
Adjusting the crossover frequency
1
Display the < X'over> screen.
On the <Top Menu> screen:
2
Select the item to adjust (1), then make
adjustments (2).
<HPF>
Adjusts the crossover for the
front ([Front]) or rear ([Rear])
speakers (high pass filter).
<LPF>
Adjusts the crossover for the
subwoofer (low pass filter).*
< Level>
Adjusts the subwoofer level.
<Phase> Selects the phase for the
subwoofer.*
2
<Freq>
Adjusts the crossover frequency.
* Adjustable only when the subwoofer is activated. (Page 41)
1
* Not selectable when <Freq> is set to <Through>.
2
36

Adjustment for video playback

Adjusting the picture
You can adjust the picture quality.
1
Display the adjustment menu.
1
2
Select [DIM ON ] (dimmer on) or [ DIM OFF]
(dimmer off).
3
Adjust the picture (–15 to +15).
<Bright > Adjusts the brightness.
<Contrast> Adjusts the contrast.
<Black>
Adjusts the blackness.
<Color> Adjusts the color.
<Tint>* Adjusts the tint.
<Sharpness> Adjusts the sharpness.
* Adjustable only when the incoming signal is NTSC.