Using The Bluetooth Mobile Phone - Kenwood DDX3035BT Instruction Manual

BLUETOOTH BLUETOOTH
Connecting a registered Bluetooth
device
1
Display the <Bluetooth Setup> screen.
(Page 28)
2
3
Select the device you want to connect (1),
then select the usage of the device (2).
[TEL (HFP)]: for mobile phone
[Audio (A2DP)]: for Bluetooth audio player
[PANDORA (SPP)]: for Pandora*
• Selectable items depend on the device you
are operating.
• If you connect a device while another device
is connected, the device previously connected
is disconnected and the connection for the
device recently connected is established.
* [PANDORA (SPP)] appears only for DDX3035BT Region 4.
Deleting a registered Bluetooth device
1
Display the <Bluetooth Setup> screen.
(Page 28)
2
3
Select a device to delete (1), then delete
the registration (2).
*
A confirmation message appears. Press [Yes].
* [PANDORA (SPP)] appears only for DDX3035BT Region 4.

Using the Bluetooth mobile phone

Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 25)
To reject a call
*
When <Auto Response> is set to [On] (Page 34)
The unit answers the incoming call automatically.
Ending a call
While talking...
ENGLISH 29