Using The External Navigation Unit - Kenwood DDX3035BT Instruction Manual

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS

Using the external navigation unit

You can connect a navigation unit (KNA-G 630:
optional accessory) to the navigation input terminal
so that you can view the navigation screen.
(Page 52)
• The navigation guidance comes out of the front
speakers even when you listen to an audio source.
Viewing the navigation screen
On the <Top Menu> screen:
On the any screen:
• While the navigation screen is displayed, the touch
panel operations are available only for navigation.
• The aspect ratio of the navigation screen is fixed
to <Full> regardless of the <Aspect> setting
(Page 37).
26
To exit the navigation screen
Settings for the navigation unit
1
Display the <Input> setting screen.
On the <Top Menu> screen:
2
Display the <Navigation> screen.
3
<Guidance> Select which front speakers
are used for the navigation
guidance.
<Volume>
Adjust the volume of the
navigation guidance. (0 to 35)
<NAV Mute> Select [ON] to attenuate the
sound coming out of speakers
other than the front speakers
during navigation guidance.
• To cancel the attenuation,
select [OFF].
<NAV Setup> Press [Enter] to display the
setup screen for the navigation
unit. See the instruction manual
supplied for the navigation unit.