Adjustment For Video Playback - Kenwood DDX9903S Instruction Manual

SETTINGS
❏ Adjusting the sound effect
1
Display the <Audio> screen. (Page 63)
2
Display the <Sound Effect> screen.
3
Adjust each item.
<Bass Boost>
Selects the bass boost level.
• OFF (Initial)/1/2/3
<Loudness> Adjusts loudness. (The LOUD
indicator lights up when the
loudness is adjusted.)
• OFF (Initial)/Low/High
<Drive
Reduces the driving noise by
Equalizer>
raising the bandwidth.
• OFF (Initial)/ON
<Space Virtually enhances the
Enhancer>*
sound space using the
1
Digital Signal Processor
(DSP) system. Select the
enhance level.
• OFF (Initial)/Small/
Medium/Large
68
<Supreme> Restores the sound lost due
to audio compression to a
realistic sound.
• OFF/ON (Initial)
<Realizer>
Virtually makes the sound
more realistic using the
Digital Signal Processor
(DSP) system. Select the
sound level.
• OFF (Initial)/1/2/3
<Stage EQ>
You can move the center
of the sound to the lower
or higher point. Select the
height.
• OFF (Initial)/Low/Middle/
High
You cannot change the setting when "HD Radio" (for
*
1
DDX9903S/DDX9703S/DDX6903S/DDX6703S)/"Radio" (for
DDX9716BTS/DDX916WSL) is selected as the source.

Adjustment for video playback

1
Display the pop-up short-cut menu.
DDX9903S DDX6903S
DDX6703S
DDX9703S
DDX9716BTS
2
Display the picture adjustment screen.
3
Adjust the picture.
DDX916WSL