Adjustment For Video Playback - Kenwood DDX9016S Instruction Manual

SETTINGS
❏ Adjusting the sound effect
1
Display the <Audio> screen. (Page 53)
2
Display the <Sound Effect> screen.
3
Adjust each item.
<Bass Boost>
Selects the bass boost level.
• OFF (Initial)/1/2/3
<Loudness> Adjusts loudness. (The LOUD
indicator lights up when the
loudness is adjusted.)
• OFF (Initial)/Low/High
<Drive
Reduces the driving noise by
Equalizer>
raising the bandwidth.
• OFF (Initial)/ON
<Space Virtually enhances the
Enhancer>*
sound space using the
1
Digital Signal Processor
(DSP) system. Select the
enhance level.
• OFF (Initial)/Small/
Medium/Large
58
<Supreme> Restores the sound lost due
to audio compression to a
realistic sound.
• OFF/ON (Initial)
<Realizer>
Virtually makes the sound
more realistic using the
Digital Signal Processor
(DSP) system. Select the
sound level.
• OFF (Initial)/1/2/3
<Stage EQ>
You can move the center
of the sound to the lower
or higher point. Select the
height.
• OFF (Initial)/Low/Middle/
High
You cannot change the setting when "Radio" is selected as the
*
1
source.

Adjustment for video playback

1
Display the pop-up short-cut menu.
DDX9016S DDX916WS
DDX916WSM
DDX9016SM
DDX9016DABS
2
Display the picture adjustment screen.
3
Adjust the picture.