Tuner Features - Kenwood KDC-4009 Instruction Manual

epee ee
4 OTEYomm Ot sT-Tive(-yamiuteles
¢ Number / letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
e TRACK buttons
Press the TRACK—
button to search through the tracks back-
ward.
Press the TRACK+
button to search through the tracks forward.
Use to move the cursor while entering disc name.
¢ DISC buttons
Press the DISC— button to search through the discs backward.
Press the DISC+ button to search through the discs forward.
select numbers and symbols while entering disc name.
° mH button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
e OK button
Tuner features (See page 8)
Selecting Tuning Mode:
Press the AUTO button.
Each time you press the AUTO button, the mode switches as
follows.
AUTO1 (Auto Seek Tuning)
v
AUTO2 (Preset Station Seek Tuning)
Vv
MANUAL (Manual Tuning)
Tuning:
1 Press the TUN button to turn the radio on.
3 ¢ Auto Seek Tuning
* Preset station seek tuning
Press the i
button to move to the next preset station {i.e.,
the one with the next highest number), and the é<@ button to
move to the last preset station {i.e., the one with the next
lowest number).
¢ Manual Tuning
Press the ®t! button to increase the frequency by one step.
Press the 4
button to decrease the frequency by one step.