Fujitsu Siemens Computers SCENICVIEW A17-3A Operating Manual page 29

Setting functions in the "Advanced" menu
Calling the Advanced setting window
Input select Selecting input signal
With this function you switch the monitor from the analogue to the digital mode and
vice versa, when two signal sources are connected.
The condition is that the graphic card used supports this function.
Activate/deactivate DDC-CI function
DDC-CI
On = the DDC-CI function is activated (default setting)
Off = the DDC-CI function is deactivated
Resolution Displaying monitor data
Notifier
The optimum resolution for this monitor is 1280 x 1024 pixels. With the function
activated (On), a message appears on the screen after approx. 30 seconds if a
different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality.
With the function deactivated (Off), no message appears.
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The Auto Processing
message is displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
A26361-K1159-Z120-1-7619, edition 1
SCENICVIEW A17-3A/A19-3A
21