Table of Contents
Advertisement
BP7480 CF5100 PENBROOKE SELECT
10.1
NOTE: If you are planning to install an optional
Emerson Accent Light Fixture on your ceiling fan,
remove the coupler cover at this time for
installation.
Locate the yellow wire terminated by a wire connector
on top the motor housing assembly (Figure 20).
10.2
Separate, untwist and unkink the 80" accent light
harness yellow wire (supplied with the fan) . Join the 80"
accent light harness yellow wire to the motor housing
yellow connector (Figure 21).
Feed the accent light harness yellow wire through the
down rod, coupler cover and ceiling cover.
NOTE: The red and brown wires coming from the
top of the motor are capped with wire connectors.
DO NOT remove these connectors.
10.3
An accessory control is required to operate the optional
accent light. See accessory control for wiring
instructions.
12/18/13
10:35 AM
10. Accent Light Harness Installation
Page 13
DO NOT REMOVE THESE
WIRE CONNECTORS
BROWN
WIRE
RED WIRE
Figure 20
DO NOT REMOVE THESE
WIRE CONNECTORS
BROWN
WIRE
RED WIRE
ACCENT LIGHT HARNESS
YELLOW WIRE
Figure 21
Please contact 1-800-654-3545 for further assistance
13
COUPLER
COVER
DOWNROD
MOTOR COUPLING
YELLOW WIRE
CONNECTOR FROM
MOTOR
COUPLER
COVER
DOWNROD
MOTOR COUPLING
YELLOW WIRE
CONNECTOR FROM
MOTOR
emersonfans.com
U.L. Model No.: CF5100
Advertisement
Table of Contents
