Installation & Startup (Continued) - Garland MWE3W Installation And Operation Manual

INSTALLATION/OPERATION MANUAL
INSTALLATION & STARTUP (continued)
5. GAS GRILL ONLY, (for electric grills, skip to step 6 on
the next page): Install the included quick-disconnect
gas hose to the inlet fitting on the underside of the
grill by threading a 3/4" NPT nipple into the elbow,
then install the brass male quick-disconnect coupler
included with the hose.
Connect the hose and ensure the sleeve snaps fully
forward against the retaining ring.
REAR OF GRILL
BOTTOM OF GRILL
FACTORY INSTALLED
3/4" NIPPLE (not supplied)
With the manual shut-off valve closed, install the other
end of the hose to the gas supply.
6. Install grease bucket rails as shown below:
Page 16
FLEXIBLE GAS HOSE
TO GAS
SUPPLY
GAS
FLOW
GREASE BUCKETS & RAILS
ARE NOT SUPPLIED
BY THE MANUFACTURER
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
7. Install flue box to back of grill.
FLUE BOX IS
NOT SUPPLIED BY
THE MANUFACTURER
8. Roll grill under exhaust hood. Grill must be level front
to back, side to side and diagonally. Adjust casters
accordingly to obtain final level.
PART #4521777 (10/09/09)