Password; Set Date And Time - Lathem LTR4-512 Installation & User Manual

[0] = Password

You must enter a password for most programming functions. To enter your password, press [#][0][#]
Enter your 6-digit password, then press [#]
Once you enter your password, you can now program your Master until it detects that you haven't
pressed a key for 5 minutes. After that, you must re-enter your password to keep programming
The administrator password 332537 [DEALER] allows you to access advanced functions. Functions that
require the Administrator Password are [2] Select Clock Control, [6] Enable Circuits, [7] Daylight
Savings, and [B] Communications
The default user password is 000000. See Function [C] Change Password to learn how to change your
user password. You cannot change the administrator password

[1] = Set Date and Time

To set the date and time, enter your password (#0#), then [#][1][#]
Enter the numbers for the month, date and year (4-digit year), then press [#], such as
[0][4][0][3][2][0][0][3][#] shown below:
ENT.DATE: 04-03-2003
ENTER DAY-OF-WEEK: D
1=SUNDAY..7=SATURDAY
Enter a number [1] - [7] for the day of the week, Sunday through Saturday:
[1]=Sunday [2]=Monday
[5]=Thursday
For example, if you press [5], the display shows
ENT.DATE: 04-03-2003
TODAY IS
ENTER TIME: HH:MM
SELECT [0]PM / [1]AM
Press [#] to confirm or [*] to try again
LTRx-512 Installation and User's Guide
[3]=Tuesday [4]=Wednesday
[6]=Friday [7]=Saturday
THURSDAY
19