Vent Connector Removal And Installation (Continued) - Travis Industries 33 DVI Insert Owner's Manual

18
Installation (for qualified installers only)

Vent Connector Removal and Installation (continued)

Vent Connector Removal
Pull the vent connector
rod forward.
WARNING: The anti-seize on
the vent connector can stain
clothing, carpets, or other
items.
Vent Connector Installation
Push the vent
connector rod in, lift
slightly, and line it up
so the tabs on the end
of the rod engage the
hooks on the vent
connector
© Travis Industries
Attach the flex vent to
the vent connector.
Pull on the vent connector rod until the
vent connector snaps into place. Slide
the vent connector rod in to conceal it.
4120319
Slide the
connector to the
rear. It will
"snap" out.
Slide the insert
into place, lining
up these guides
with the edges of
the vent
connector.
100-01237_000