HP ProLiant BL620c G7 User Manual page 35

Remove the heatsink protective cover.
13.
CAUTION: Orient the heatsink as indicated in the procedure. Otherwise, you cannot install the
hard drive cage.
CAUTION: When tightening the heatsink screws, first tighten the front screw four to five turns,
tighten the back screw completely, and then finish tightening the front screw.
Orient and install the heatsink.
14.
Install the front panel/hard drive cage assembly.
15.
Install the access panel (on page 16).
16.
Install the hard drives
17.
Install the server blade
18.
Power up the server blade (on page 14).
19.
("Hot-plug SAS or SATA hard drive
("Installing a server blade" on page 28).
option" on page 47).
Hardware options installation 35