Lowrance HDS-5x Operation Manual page 82

Settings
Serial Ports
device, like an autopilot.
1. Highlight
and press ENTER. The Serial Settings
2. Select the desired setting (Protocol,
Port 2) and press ENTER.
3. Use the keypad to select the desired option
and press ENTER.
4. Highlight
NMEA 0183 Output
Controls NMEA 0183 sentences used, allowing you to select the type of messages
your unit will transmit when communicating with other NMEA 0183 devices. The
default setting will work well under most conditions.
To access NMEA 0183 Output screen:
1.
Select NMEA 0183 Output from the
Network menu and press ENTER.
2.
Highlight a desired sentence and press
ENTER to turn it on/off.
3.
press ENTER.
Serial Ports
OK and press ENTER.
OK and
NMEA 0183 Output screen
80