Water Speed Averaging; Temperature Calibration; Temperature Averaging - Lowrance HDS-5x Operation Manual

Water Speed Averaging

Averages water speed by measuring your speed at a selected interval. Water speed
To select a Water Averaging interval :
1. Highlight the
2. Press the keypad left/right to select the desired interval.
3. Highlight

Temperature Calibration

When there are differences in temperature data,
Temperature Calibration calibrates data from one
temperature sensor with date from another temperature
source. That ensures the accuracy of temperature data
from the selected temperature sensor.
To calibrate Temperature:
1. Select the
2.
NOTE: If the temperature sensor is reading a lower
temperature than the other temperature source, you will input a
positive (+) percentage. Conversely, a negative (–) percentage
will be entered if the temperature sensor is reading a higher

Temperature Averaging

Averages temperature by measuring temperature
data at a selected interval. Temperature intervals
range from one to 30 seconds.
Water Speed Averaging
OK and press ENTER.
Temperature Calibration
ENTER
temperature than the other temperature source.
calibration dialog box
OK and press ENTER.
57
Settings