Bearing Alignment - Lowrance HDS-5x Operation Manual

Bearing alignment

Used to align the bow of your vessel with the heading line (zero point). Bearing
alignment is also referred to as zero bearing.
To make adjustments to bearing alignment, switch the radar state to Transmit and set
radar orientation to Heading Up.
To select Heading up orientation:
2. Select Orientation and press ENTER.
3. Use the keypad to select Heading Up and press ENTER.
4. Press EXIT.
Before Bearing Alignment
Bow of ship is lined up with
the tip of a peninsula; the
bearing line is not.
To
1.
2. Select
Adjust Bearing Alignment
and press ENTER
3.
target is at 0°
MENU.
After Bearing Alignment
Bearing line aligned with
63
Settings