Open Array Park Angle
When an open array antenna is turned off, the antenna's momentum will cause it
to continue rotating before coming to a stop. Open array park angle allows you to
adjust the antenna's parking angle so it will stop in a desired position.
To Adjust Open Array Park Angle:
1.
Select
Adjust Bearing Alignment
2.
Press the keypad left/right to enter a value that will
cause the antenna to stop in the desired position.
Tune
You should not have to adjust Tune for the life of this unit. This feature is intended
for use by only trained technicians.
Reset Radar to Factory Defaults
Resets radar to factory default settings.
ENTER. The
65
Settings