5 HDI, 5 TS, 7x GPS TS, 7 HDI, 7 TS, 9 HDI, 9 TS and 12 TS models
Front controls
1
4
6
*988-11771-001*
HOOK2 Quick Guide
1
Pages
Zoom in/
2
out
3
Arrows
2
3
4
Exit (X)
5
7
Menu/
5
Enter
Cursor/
6
Waypoint
7
Power
Press to activate the Home page.
Press to zoom the image.
Press both keys simultaneous to create a MOB
(Man Over Board) waypoint at the vessel's
position.
On any full screen page: press to position the
cursor on the image. Press to pan the image in
any direction.
On multi-panel pages: press to select panel.
In menus and dialogs: press to highlight an
option.
On a maximized multi-panel page: press to
return to the multi-panel page.
In menus and dialogs: press to return to
previous menu level and to exit a dialog.
On any full screen page with no menu or
dialog active: press to display the menu.
On multi-panel pages: press to maximize the
current selected panel.
In menus and dialogs: press to confirm a
selection.
Press to activate/deactivate the cursor.
Press and hold to save a waypoint.
Press to display the System Controls dialog.
Press and hold to power the unit on/off.
HOOK2 series |
EN
Quick Guide - EN
|
1
Need help?
Do you have a question about the HOOK2 7x GPS TS and is the answer not in the manual?
Questions and answers
Although I have all screens and gps speed I cannot bring up depth,or water temp
To display depth and water temperature on the Lowrance 7x GPS TS, use the overlay data feature. You can turn on data items like depth and temperature from the System Controls dialog. Follow these steps:
1. Open the System Controls dialog.
2. Select the "Edit overlay" option to enter edit mode.
3. Turn on the desired data items (e.g., depth, temperature).
4. Exit edit mode by pressing the Exit (X) key.
You can also change the position of the data and remove items individually.
This answer is automatically generated
How can I print the Hook 7 users guide?