Settings
1.
Press
MENU twice.
2.
Select
Radar and press ENTER.
3.
Highlight
4.
Installation
Provides access to the Radar Installation menu.
To access
Press the MENU key twice.
1.
2.
Highlight Radar and press ENTER.
3.
Select Installation and press ENTER.
The installation adjustment menu is used to make adjustments to bearing alignment,
range offset, antenna height and open array park angle.
When the installation adjustment menu is accessed, press the
keypad up/down to select a feature. Press the keypad left/right
to make adjustments to a selected feature.
Press EXIT to return to the Radar Installation menu. To remove
the Radar Installation menu from the screen, select Close and
press ENTER.
Bearings and press ENTER.
62
ENTER.