Proactive Networking - ProCurve 420 Installation And Getting Started Manual

Proactive Networking

The following interfaces provide tests, indicators, and an event log that can
be used to monitor the access point and its network connections and to help
you troubleshoot:
■ A graphical Web browser interface that you can use to manage your access
point from a PC running a supported Web browser, for example Microsoft
Internet Explorer.
The Status tab can be used to display access point configuration settings,
attached client station settings, and the event log.
■ A full-featured easy-to-use console interface that you can access by
connecting a standard terminal or PC running a terminal emulator to the
access point's console port. (For information on the console port's pin
assignments, see "Direct Console Access" on page 2-12.) The console
interface is also accessible through a Telnet or Secure Shell connection.
The ping command can test device access and connectivity. The show
command at all levels of the CLI provides detailed access point configu-
ration information.
Troubleshooting
Proactive Networking
5-5