Setting Transmit Power Limits Using The Web Inteface - ProCurve 420 Installation And Getting Started Manual

Using an External Antenna with the Access Point 420
Installation Procedures

Setting Transmit Power Limits Using the Web Inteface

1.
2.
3.
4.
5.
4-10
HP420(if-wireless g)#transmit-limits 50 100 56
Select the Configuration tab.
Click the [ Port/Radio Settings]
Scroll down to the External Antennas section at the bottom of the page.
From the drop-down menu for Low Channel, Mid Channel, and High Channel,
select the settings as given for the antenna and region in the Transmit
Power Control Settings table for that radio mode (b; g; b and g).
Click the
[Apply Changes]
Transmit Power Control limits
for Low, Middle, and High
channels.
button.
button.