M-Audio Trigger Finger Pro User Manual page 51

Mackie Control
When a control bank's mapping is set to Mackie, they are automatically set to control one of a
set group of functions. You can use Control Mode to switch between their various functions
easily.
To set the Mackie Control functions of the Assignable Controls:
1. Enter Control Mode by pressing the Control Mode Button (Ctrl).
2. Turn the Value Dial to select which type of Assignable Control you are changing: Knobs,
Faders, or Buttons. (The Advanced option pertains to the DAW Control buttons. See
the following DAW Control Buttons section for more information.)
•
Assignable Knobs: The knobs control V-Pots. You can assign them by pressing the
first Function Button (Assign) and pressing any one of the first three Function
Buttons to select the assignment: Pans, Sends, Track, Plug-in, EQ, or
Instrument. Turn the Value Dial to move between the two pages. Press the fourth
Function Button (Exit) to return to the previous screen.
•
Assignable Faders: The faders control the track level faders.
•
Assignable Buttons: The buttons control any one of five functions: Mute, Solo,
Track Select (TrkSel), Record-Arm (RecArm), and V-Select (V-Sel).
Tips:
You can set each control bank to a different function. For instance, one bank of buttons
can control mutes while another can control solos.
You can switch between Tracks 1-4 and Tracks 5-8 in this mode by pressing the second
Function Button (Tracks).
3. Make other changes in Control Mode, or exit Control Mode by pressing the Control
Mode Button (Ctrl) or the fourth Function Button (Exit).
Tip: To switch between Tracks 1-4 and Tracks 5-8 while in any mode, press and hold the
Control Bank button, press the fourth Function Button (Tracks) to switch between 1-4 or 5-
8, and then release the Control Bank button.
51
