Table of Contents
Advertisement
Value
(Assignable Knobs and Assignable Faders only)
The Value settings determine the minimum (Min Val) and maximum (Max Val) values each
assignable control is capable of sending out.
To change a control's minimum and maximum values:
1.
Enter Control Mode by pressing the Control Mode Button (Ctrl).
2.
Press the second Function Button (Edit Control). The display will tell you to move the
desired control.
3.
Press the Control Bank button to select the desired bank.
Move the Assignable Control you want to edit (move a fader or knob), or use the Value
Dial to select it. The control type and number will appear in the upper right corner of the
display. When you have selected the desired control, press the third Function Button
(Edit Control).
4.
Turn the second Assignable Knob (Min Val) to set the minimum value (00–127).
Turn the third Assignable Knob (Max Val) to set the maximum value (00–127).
5.
Make other changes in Control Mode, or exit Control Mode by pressing the Control
Mode Button (Ctrl) or the fourth Function Button (Exit) twice.
KNOBS
CC:
00
01: Preset
MIN VAL:
MAX VAL:
00
127
BANK:A
KNOB:A01
MESSAGE:
CC
44
SEL->
MORE
EXIT
Hide quick links:
Advertisement
Table of Contents
