M-Audio Trigger Finger Pro User Manual page 37

Colors
The Color settings determine each pad's LED color when pressed/"on" (Pad On) and when
not pressed/"off" (Pad Off).
Tip: Select contrasting colors for a pad's on and off states to easily see your presses. Also,
select different colors for each pad bank to easily determine which bank is selected.
To change a pad's colors:
1. Enter Pad Mode by pressing the Pad Mode Button (Pad).
2. Press the second Function Button (Edit Pads).
3. Press the third Function Button (More).
4. Use the Pad Bank button to select the desired pad bank, and press the pad whose
velocities you want to edit.
5. Turn the first Assignable Knob (Pad On) to set the color for when the pad is
pressed/"on."
Turn the second Assignable Knob (Pad Off) to set the color for when the pad is not
pressed/"off."
The available colors for each setting are: Off (no light), Red, Orange, Amber, Coral,
Yellow, Lime, Green, Jade, Aqua, Sky, Indigo, Violet, Purple, Arctic, Pink, and Hot
Pink. You can press and release the pads while selecting your colors to test how they
look.
6. Make other changes in Pad Mode, or exit Pad Mode by pressing the Pad Mode Button
(Pad) or the fourth Function Button (Exit) three times.
TRIGGER PADS
PAD ON: PAD OFF:
Green Indigo
01: Preset
MIDI-CH:
UsePrefs
BANK:A PAD:A01 SELECT->
OUTPUT:
UsePrefs
37
PAD
MORE EXIT