Recording - M-Audio Trigger Finger Pro User Manual

Recording

Trigger Finger Pro's real-time recording function and velocity- and pressure-sensitive pads let
you create Sequences quickly and intuitively.
To record a Sequence in real time:
1. In any mode, press Trigger Finger Pro's Record button. Its Sequencer is now record-
armed.
2. If the Sequence is not already playing, press Play to start recording.
3. Hit the pads to record their sounds as steps in the Sequence. You can play (and therefore
record) multiple pads simultaneously. The pads' velocities will also be recorded.
The recording Sequence will loop until you stop it. As it loops, if you record a step over
an existing one, it will replace it. Otherwise, your previously recorded steps will remain in
the Sequence.
To erase steps from the Sequence, see the Steps section of this chapter.
Tips:
To loop only the current bar, press the Loop button. Press it again to resume normal
playback.
You can use Pad Roll Mode to create drum fills or use Fixed Mode to record pads' hits at
a set velocity. See the Pad Roll Mode and Fixed Mode sections to learn more.
4. To stop recording, press the Record button.
5. To stop playback, press the Stop button.
59