Table of Contents
Advertisement
Mapping
The assignable controls' mapping determines how they will communicate with your software.
Tip: You can see an overview of all assignable controls' mapping in the display by pressing
and holding the Control Bank button (in any mode).
To change the assignable controls' mapping:
1.
Enter Control Mode by pressing the Control Mode Button (Ctrl).
2.
Press the third Function Button (Mapping). The mapping of each pad bank will appear
on the left of the display.
3.
Use each Assignable Knob to select the mapping for the corresponding bank (above it),
or use the second Function Button (Toggle All) to select the mapping for all banks
simultaneously. For use with a standard DAW, select MIDI. For use with a standard DAW
that uses the Mackie Control or HUI protocols, select Mackie or HUI. For use with
Arsenal, select Arsenal.
Turn the Value Dial to select which type of Assignable Control you are changing: Knobs,
Faders, or Buttons.
Important: When a control bank's mapping is set to Mackie or HUI, they are
automatically set to control one of a set group of functions, which you can change. See
the later Mackie Control and HUI sections to learn more.
4.
When you have selected the desired mappings, press the fourth Function Button (Exit).
5.
Make other changes in Control Mode by pressing the second Function Button (Edit
Controls), or exit Control Mode by pressing the Control Mode Button (Ctrl) or the fourth
Function Button (Exit).
KNOBS
BANK A:
BANK B:
MIDI
MIDI
MAPPING ASSIGNMENTS
BANK C:
BANK D:
MIDI
MIDI
TOGGLE
ALL
41
CTRL->
TYPE
EXIT
Hide quick links:
Advertisement
Table of Contents
