M-Audio Trigger Finger Pro User Manual page 36

Pressure
Trigger Finger Pro's pads are pressure-sensitive. They respond to changes in pressure after
the initial press. The Pressure setting determines what kind of pressure message each pad
sends out.
To change a pad's pressure settings:
1. Enter Pad Mode by pressing the Pad Mode Button (Pad).
2. Press the second Function Button (Edit Pads).
3. Use the Pad Bank button to select the desired pad bank, and press the pad whose
velocities you want to edit.
4. Press the first Function Button (Pressure) to cycle through the available options:
•
Off: No message will be sent.
•
Channel: Aftertouch (also known as channel pressure) messages will be sent.
•
Poly: Poly aftertouch (also known as key aftertouch) messages will be sent.
•
CC: The pressure will send a specific CC message. Use the fourth Assignable
Knob (CC) to set the CC number (00–127).
5. Make other changes in Pad Mode, or exit Pad Mode by pressing the Pad Mode Button
(Pad) or the fourth Function Button (Exit).
TRIGGER PADS
NOTE: MIN VEL:
C1 00
01: Preset
MAX VEL: PRESSURE:
127
BANK:A PAD:A01 SELECT->
Poly MORE
36
PAD
EXIT