Table of Contents
Advertisement
Regulatory compliance notices
Regulatory compliance identification numbers
For the purpose of regulatory compliance certifications and identification, this product has been assigned
a unique regulatory model number. The regulatory model number can be found on the product namepla
label, along w
information for this product, always refer to this regulatory model number. The regulatory model n
not the marketing name
Federal Communications Commissi
Part 15 of the Federal Communications Commission (FC
Frequency (RF) emission limits to provide an
devices, including computers, generate RF ener
co red by these rules. These rules pl
ve
and B, depending upon their intended installation. Class A devices are those that may reasonably b
expected to be installed in a business or commercial environment. Class B devices are those that may
reasonably be expected to
The FCC requires devices in both classes to bear a label indicating the interference potenti
as well as additional operating instructions for the user.
FCC rating label
T
he FCC rating label on the device shows the classification (A or B) of the equipment. Class B devices
h
ave an FCC logo or ID on the label. Class A devices do not have an FCC logo or ID on the label. After
you determine the class of
Class A equipment
This equipment has been tested and found to comply with the limits for a Cla
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec
interference when the equipment is operated in a commercial environment. This equipment ge
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of this equipmen
residential area is likely to cause harmful interference, in which case the user will be required to c
the interference at personal expense.
Class B equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
ith all required approval markings and information. When requesting compliance
or model number of the product.
ace computers and related peripheral devices into two classes, A
be installed in a residential environment (for example, personal computers).
the device, refer to the corresponding statement.
on notice
C) Rules and Regulations has established Radio
interference-free radio frequency spectrum. Many electronic
gy incidental to their intended function and are, therefore,
umber is
al of the device
ss A digital device, pursuant
tion against harmful
nerates,
t in a
orrect
Regulatory compliance notices 70
te
e
Advertisement
Table of Contents
Troubleshooting
